KYOSHO Mini-Z AWD Rear 6-Piece Delrin Wide Rims with Tyres DMZA601RW10 by GPM  [DMZA601RW10]

Mini-z AWD Delrin Rear Wide Ridge Rims (6p, 1.0mm Off set , Width 11mm) With Tires - 1pr set - GPM DMZA601RW10
Price:
CAD$6.63
Brand:
GPM
Model:
DMZA601RW10
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Mini-z AWD Delrin Rear Wide Ridge Rims (6p, 1.0mm Off set , Width 11mm) With Tires - 1pr set - GPM DMZA601RW10" title="Mini-z AWD Delrin Rear Wide Ridge Rims (6p, 1.0mm Off set , Width 11mm) With Tires - 1pr set - GPM DMZA601RW10"
alt="Mini-z AWD Delrin Rear Wide Ridge Rims (6p, 1.0mm Off set , Width 11mm) With Tires - 1pr set - GPM DMZA601RW10" title="Mini-z AWD Delrin Rear Wide Ridge Rims (6p, 1.0mm Off set , Width 11mm) With Tires - 1pr set - GPM DMZA601RW10"

Delrin 6-piece rear rims for Mini-Z AWD

This DMZA601RW10 rear wheel assembly is an aftermarket 6-piece rim and tyre package made for KYOSHO Mini-Z AWD models, designed to widen the rear track and provide a straightforward swap into Mini-Z AWD style rear hubs.

The rims use Delrin for the rim bodies in a multi-piece format that holds the tyre while delivering an 11mm rim width and a 1.0mm offset to broaden the rear footprint. Tyres are supplied mounted to the rims so the set is ready for installation straight from the box.

Installation follows standard Mini-Z AWD and MR-03 AWD rear wheel procedures: remove the stock rear wheels, slide the new rim assembly onto the hub or axle, fasten with the existing wheel hardware and then inspect clearance around suspension and the body shell. The original listing does not note any chassis modifications.

For setup and handling, these wider Delrin rears change the tyre contact patch and rear track, useful when tuning rear grip or achieving a wider scale look. Always verify wheel-to-body clearance and re-check free spin after fitting to ensure no contact with the chassis or suspension components.

Will these fit MR-03 AWD rear hubs?

The original listing references Mini-Z AWD and MR-03 AWD fitment, so these rims are compatible with MR-03 AWD rear assemblies when installed using standard Mini-Z rear wheel replacement steps.

Are the tyres supplied mounted to the rims?

Yes, the set includes tyres already mounted to the Delrin rear rims so you can fit them without separate tyre mounting work.

Do I need to modify the chassis to fit these wheels?

No chassis changes are described in the original notes; typical installation uses the existing wheel hardware, but you should check for clearance with your chosen body and suspension setup.

Copyright © 2008-2026 rcjaz.ca All rights reserved