Kyosho Mini-Z AWD Front 5-Spoke Rim 1.0 Offset AWD-18/F1/SI by 3Racing  [AWD-18/F1/SI]

Front 5-spoke rim for Mini-Z AWD handling

This front 5-spoke rim is an RC-scale replacement made for Kyosho Mini-Z AWD applications, identified as model AWD-18/F1/SI. It fits Mini-Z AWD wheel hubs and MR-03 AWD chassis where a 1.0 offset front wheel is required to achieve the correct fit or to tweak handling characteristics.

Installation is simple: remove the original front wheel, fit this rim onto the wheel hex or adapter used by your MR-03 AWD setup, and secure with the appropriate hex screw. After fitting, inspect clearance around suspension arms and steering components to ensure no rubbing against the body or linkages.

From a setup perspective a 1.0 offset front rim moves the wheel center relative to the hub and can alter scrub radius and steering feel on the Mini-Z. Use this rim when adjusting front track, dialling steering response, or matching wheel and tyre profiles for flat on-road setups.

After installation carry out routine checks: confirm wheel fasteners are tight, check static balance if you swap tyres, and verify symmetric fit left to right to prevent unwanted steering pull. This part is intended as an aftermarket accessory for model-scale tuning and preparation.