KYOSHO Mini-Z AWD 18p Sinkage Rims for MR-03 - MZA803FR+1.5 by GPM  [MZA803FR+1.5]

Scale sinkage rims for Mini-Z AWD

These are scale alloy front/rear sinkage rims for Mini-Z AWD models supplied as 1pr, model MZA803FR+1.5. The wheel uses an 18-hole (18p) pattern, a 1.5mm offset and an 8.5mm width, intended for MR-03 style fitment and scale tyre seating. This is an RC-scale replacement or hop-up rim set for model tuning and visual proportion adjustments.

The rims are machined aluminium, intended to replace plastic wheel halves to alter wheel stance, tyre fitment and visual proportion without changing driveline components. Because the offset is a shallow 1.5mm these rims move the tyre slightly outward compared with zero-offset parts, which can correct narrow tyre tuck or help match scale track width on select body shells.

Installation follows standard Mini-Z wheel procedures: remove the original wheel halves, fit the tyre onto the rim, align the hex and centring peg, then secure using your chassis' original screws and washers. After fitting, verify clearance for suspension travel and body mounts. No motor, ESC or gearbox modifications are required to use these rims on compatible Mini-Z AWD platforms.