Kyosho Mini Inferno ST Alloy Servo Mount MIF024KO/F/S by GPM  [MIF024KO/F/S]

Kyosho Mini Inferno ST Alloy Servo Mount With Screws & Shims (For KO Propo , Futaba, Sanwa) - 1pc set - GPM MIF024KO/F/S
Price:
CAD$8.56
Brand:
GPM
Model:
MIF024KO/F/S
GTIN:
4894538097245
Condition:
Brand New
Write a review
alt="Kyosho Mini Inferno ST Alloy Servo Mount With Screws & Shims (For KO Propo , Futaba, Sanwa) - 1pc set - GPM MIF024KO/F/S" title="Kyosho Mini Inferno ST Alloy Servo Mount With Screws & Shims (For KO Propo , Futaba, Sanwa) - 1pc set - GPM MIF024KO/F/S"
alt="Kyosho Mini Inferno ST Alloy Servo Mount With Screws & Shims (For KO Propo , Futaba, Sanwa) - 1pc set - GPM MIF024KO/F/S" title="Kyosho Mini Inferno ST Alloy Servo Mount With Screws & Shims (For KO Propo , Futaba, Sanwa) - 1pc set - GPM MIF024KO/F/S"
alt="Kyosho Mini Inferno ST Alloy Servo Mount With Screws & Shims (For KO Propo , Futaba, Sanwa) - 1pc set - GPM MIF024KO/F/S" title="Kyosho Mini Inferno ST Alloy Servo Mount With Screws & Shims (For KO Propo , Futaba, Sanwa) - 1pc set - GPM MIF024KO/F/S"
alt="Kyosho Mini Inferno ST Alloy Servo Mount With Screws & Shims (For KO Propo , Futaba, Sanwa) - 1pc set - GPM MIF024KO/F/S" title="Kyosho Mini Inferno ST Alloy Servo Mount With Screws & Shims (For KO Propo , Futaba, Sanwa) - 1pc set - GPM MIF024KO/F/S"
alt="Kyosho Mini Inferno ST Alloy Servo Mount With Screws & Shims (For KO Propo , Futaba, Sanwa) - 1pc set - GPM MIF024KO/F/S" title="Kyosho Mini Inferno ST Alloy Servo Mount With Screws & Shims (For KO Propo , Futaba, Sanwa) - 1pc set - GPM MIF024KO/F/S"

Rigid alloy servo bracket for Mini Inferno ST

Made to fit the Kyosho Mini Inferno ST, this single-piece alloy servo mount is supplied as a 1pc set with mounting screws and shims. It creates a firm mounting point for standard RC servos from KO Propo, Futaba and Sanwa, keeping servo alignment stable during setup and track use.

Fit this mount to replace a damaged plastic bracket or to gain finer control over servo height and tilt for improved steering response. The included shims allow quick adjustment of servo orientation without machining, and the supplied screws match the mount holes for easy fitting.

Fitting tips: remove the stock servo bracket, position the servo against the alloy plate, insert shims to correct any offset and secure with the provided screws. Inspect surrounding linkages for clearance and confirm the servo horn travels without binding.

Compatible Models

  • KO Propo
  • Futaba
  • Sanwa

What is included in the kit?

This kit is supplied as a single alloy mount with the matching mounting screws and a set of shims for height and angle adjustment.

Which servos will fit this mount?

The mount is designed for standard-sized servos that match the KO Propo, Futaba and Sanwa footprints listed in the compatibility box. Verify your servo case against the mounting holes before installation.

Are special tools required to install it?

Basic hand tools such as a small hex driver and screwdriver are enough. Use thread lock if you want extra security for long term use.

Copyright © 2008-2026 rcjaz.ca All rights reserved