KYOSHO Inferno MP7.5 / Hyper 7 1/8 Nylon Wheel (5 Poles) BUGW1105/G by GPM  [BUGW1105/G]

1/8 nylon wheel compatible with Hyper 7 and MP9

This pair of 1/8 scale replacement wheels is designed for Kyosho buggy platforms and supplied in green with a five-pole spoke layout. It is sold as 1pr and suits tuning or replacement needs where a lightweight nylon rim is preferred.

Compatibility and fitment: confirm hub bore diameter and wheel hex size on your chassis before fitting, keep the original hex orientation and wheel washers, and check clearance relative to suspension arms and body posts. These wheels are intended for 1/8 scale off-road buggy use only.

Installation overview: remove existing wheel nuts and wheels, inspect the hex and axle hardware for wear, slide the nylon wheel onto the hex until it seats, then re-fit washers and wheel nuts using your usual torque. Rotate the steering through its full range to ensure there is no rubbing on arms or the chassis.

Tuning role: nylon rims have different flex and mass compared with composite or alloy wheels, which can alter corner feel and traction. Use this wheel as a measured change while adjusting tyre inserts, camber or rebound to refine handling for your track.