Kyosho Inferno MP7.5 Front lower arm lock plate Alloy-7075 3mm HMP7508F by GPM  [HMP7508F]

Front lower arm support plate summary

This is a machined lower arm lock plate intended for the Kyosho Inferno MP7.5 front gearbox area. Produced from Alloy-7075 at 3mm thickness, it fits the standard lower arm mounting points on the MP7.5 chassis as a direct replacement or spare component.

The plate strengthens the lower arm pivot region next to the front gearbox to limit local flex and keep the arm alignment stable under load during tuning and racing. Its neutral profile provides mechanical reinforcement without changing suspension geometry.

For installation, remove the original lock plate, transfer any existing bushings or hardware, and secure this plate with the stock fasteners. Use the correct hex driver and verify screw torque after the initial runs to avoid loosening.

Tuning note: treat this part as a rigidity upgrade around the lower arm mount and include it in a wider setup plan covering shock valving, spring choices, and arm mounting positions. This accessory is intended for the Kyosho Inferno MP7.5 platform only.