Kyosho Inferno MP7.5 Front Damper Plate Alloy-7075 (3mm) HMP75028 by GPM  [HMP75028]

MP7.5 front shock tower reinforcement

This front damper plate is precision machined from Alloy-7075 with a 3mm nominal thickness for use on the Kyosho Inferno MP7.5 platform. The part provides a stiffer mounting surface for the front shocks and is intended as an aftermarket option to change front end response.

The plate ships as a single replacement item and installs into the MP7.5 suspension area as an optional upgrade. Remove the front shock tower assembly to fit the plate, check that the bolt holes line up with your existing tower hardware, and reuse the original fasteners unless your manual indicates otherwise. This is an accessory for model-scale tuning and maintenance only.

Setup notes: fitting a thicker Alloy-7075 plate raises local stiffness around the shock mount, which can cut unwanted flex during heavy compression and alter initial suspension movement. Test small incremental changes on-track and adjust shock damping or spring rates to match surface and driving style.