Kyosho EFW012 Ride Height Shim Set 0.5t Front and Rear 4pcs for FANTOM EP  [KY-EFW012]

Kyosho EFW012 - Ride Hight Adjust Plate(0.5t/F&R4pcs/FANTOM EP)
Price:
CAD$22.88
Brand:
Kyosho
Model:
KY-EFW012
GTIN:
4548565438150
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="Kyosho EFW012 - Ride Hight Adjust Plate(0.5t/F&R4pcs/FANTOM EP)" title="Kyosho EFW012 - Ride Hight Adjust Plate(0.5t/F&R4pcs/FANTOM EP)"
alt="Kyosho EFW012 - Ride Hight Adjust Plate(0.5t/F&R4pcs/FANTOM EP)" title="Kyosho EFW012 - Ride Hight Adjust Plate(0.5t/F&R4pcs/FANTOM EP)"

Fine Tune Your Fantom EP with Kyosho EFW012 Plates

If you want tight control over your Kyosho Fantom EP stance, the EFW012 Ride Height Adjust Plate set gives a clean way to alter ride height in 0.5mm steps. The four-piece kit supports both front and rear fitment so you can balance the chassis for different track layouts.

Tuning Notes for Track and Practice

Adjusting ride height in small increments can change weight transfer and responsiveness. These plates sit between the axle mount and chassis and provide two lower positions, letting club racers and weekend drivers tailor handling to high or low grip surfaces.

Quick Fit Installation

Installation is straightforward: insert the plates between the axle mount and the chassis where needed and secure as original. The EFW012 parts are aimed at Fantom EP owners who swap setups regularly for practice or race day.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Can I fit these plates to both front and rear axles?

Yes. The design suits both the front and rear axle mount points on the Fantom EP for symmetric or staggered changes.

How much does each plate change ride height?

Each plate introduces a 0.5mm change in ride height, and the set offers two lower mounting positions for finer tuning.

Any tips for setting ride height for different surfaces?

Start with small 0.5mm changes and test laps; lower setup usually helps on high grip asphalt while a slightly higher stance can aid rougher, low grip surfaces.

Copyright © 2008-2026 rcjaz.ca All rights reserved