Kyosho 96433 13T Pinion Gear - Spare for FW06  [KY-96433]

Price:
CAD$2.68
Brand:
Kyosho
Model:
KY-96433
GTIN:
4955439676523
Condition:
Brand New
Available in shop
Write a review

Drivetrain part tailored to FW models

The Kyosho 96433 - Pinion Gear (13T) provides dependable power transfer for FW06 and other FW Series cars. Its 13-tooth design helps transmit torque cleanly from the motor into the drivetrain, giving consistent driveability during club sessions or casual runs.

FW Series fit and checks

Made to match the FW Series tooth profile, this 13T pinion meshes neatly with compatible spur gears on the FW06 chassis. If fitting to other models, confirm the shaft diameter and tooth count to ensure a proper fit.

Setup and upkeep tips

When installing the Kyosho 13T pinion gear, set the gear mesh so there is a slight clearance between pinion and spur to avoid binding and excess wear. Keep an eye on tooth edges for signs of rounding and replace the pinion if wear appears to protect your gearbox.

Can this pinion be used on other Kyosho models?

The pinion is engineered for FW Series cars, including the FW06. It can fit other models only if the motor shaft diameter and tooth spacing match, so verify those specs before fitting.

How do I set gear mesh correctly?

Loosen the motor mount, position the motor until there is a small lateral play between teeth, then re-tighten while checking mesh. Too tight causes overheating and tooth damage; too loose leads to skipping.

What maintenance should I do for long life?

Inspect the pinion for chipped or rounded teeth after running, remove debris from the gear area, and replace the pinion if wear shows. A light gear lubricant can reduce noise and wear when appropriate.

Copyright © 2008-2026 rcjaz.ca All rights reserved