Intellect IP-CC2S1600-40C 7.4V 1600mAh Li-Po race pack for 1/18 RC cars  [IP-CC2S1600-40C]

Intellect (IP-CC2S1600-40C) - 7.4v 40C 1600mah Lipo Battery
Price:
CAD$45.51
Brand:
Intellect
Model:
IP-CC2S1600-40C
Write a review

Pack overview and intended use

This Intellect IP-CC2S1600-40C pack is a 7.4V Lithium Polymer battery developed as a race-style power source for 1/18 scale RC cars. The pack's rated capacity is 1600mAh with a 40C continuous discharge rating, making it a mid-capacity choice where steady power delivery and compact size are important. The pack uses an XH2.5 balance connector and an ABC(5102) discharge connector as supplied, and its nominal dimensions are 87x32x19mm to fit many short-wheelbase 1/18 chassis layouts.

For bench setup and track tuning, this Li-Po can be used to monitor ESC and motor response at different state-of-charge levels. Installation follows standard 1/18 battery mounting practice: secure the pack in the tray to prevent lateral movement, route connectors to avoid strain on wiring, and keep the balance lead accessible for charging. Because this is an RC-scale accessory, do not use it in any full-size application.

Specifications

  • Item Intellect Li-Po race pack
  • Material Lithium Polymers
  • Model Number IP-CC2S1600-40C
  • Voltage 7.4V
  • Capacity 1600mAh
  • C Rating 40C
  • Connectors Balance: XH2.5, Discharge: ABC(5102)
  • Dimensions 87x32x19mm (1/18 scale)
  • Color Black
  • Weight 95?3g

When choosing a pack for 1/18 racing or setup runs, confirm fit in your chassis and connector compatibility with your ESC harness; this Intellect pack supplies a compact 7.4V 1600mAh option with a 40C rating for consistent on-track behavior and tuning checks.

Use a Li-Po compatible charger that accepts an XH2.5 balance plug. Set chemistry to 2S (7.4V) and select a charge current appropriate for 1600mAh, typically 0.5C to 1C depending on how quickly you want the pack charged.
Connector standards vary by manufacturer and ESC region. Verify your ESC plug style; if it differs, you can either use a matched adapter or replace the discharge lead with the correct plug to ensure a secure connection.
The 40C rating indicates continuous discharge capability relative to capacity and helps estimate voltage sag under load. Higher C ratings typically reduce sag during high current bursts, but check your ESC and motor draw to confirm the pack meets your power demands.
Fit the pack flat in the battery tray and secure it against movement with straps or tape. Route both the balance and discharge leads away from gears and suspension links, and avoid sharp edges that could chafe the wiring.

Copyright © 2008-2026 rcjaz.ca All rights reserved