Inferno MP Series NEO 3.0 & 4.0 Hard Brake Lining - 92985B by Kyosho  [KY-92985B]

Kyosho 92985B - Hard Brake Lining (Non asbestos)
Price:
CAD$8.87
Brand:
Kyosho
Model:
KY-92985B
GTIN:
4548565452910
Condition:
Brand New
Quantity Discount
Unit Price You Save
2 $7.87 each $2.00 or 11%
3+ $7.48 each $4.17 or 16%
Write a review

Replacement hard lining for model brake assemblies

This Kyosho 92985B hard brake lining is a scale RC replacement intended for brake assemblies, made from a non asbestos material to match original pad geometry. It provides a firmer friction surface to alter pad bite and wear behavior when swapped in place of softer compounds.

Confirm fitment to the Inferno MP Series NEO 3.0 & 4.0 platforms using your parts list before purchase. Installation is carried out at the brake assembly: remove the old lining, fit the new piece, then check pad clearance and alignment during reassembly.

For setup, expect a firmer initial bite and different wear rates; bedding in and transmitter brake balance may need adjustment to suit driving style. This part is intended for model RC maintenance and tuning only, not full-size vehicles.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I remove the old lining for replacement?

Access the brake assembly with basic hand tools, note pad orientation, then gently pry off the worn lining and clean the backing before fitting the new 92985B piece.

Do I need special parts to fit this lining?

No specialized parts are required; standard brake hardware used on the Inferno MP Series will secure the new lining. Keep fasteners and shims in the original configuration unless adjustment is needed.

Any tips to ensure correct pad clearance?

After fitting, rotate the assembly by hand and set minimal clearance so pads do not rub; then perform a few light brake applications to bed the surface and recheck clearances.

Copyright © 2008-2026 rcjaz.ca All rights reserved