Imax B3_PRO LiPo Balance Charger by JAZRIDER  [B3_PRO]

Fast field charging with the Imax B3_PRO

The JAZRIDER Imax B3_PRO is a compact charger built to handle 2 to 3 cell LiPo packs while keeping size and weight low for hobbyist use. It includes an integrated 100-240V AC supply for simple mains connection. The onboard balance circuit is rated up to 850mA per cell to help equalise cells and prolong pack life.

Main specifications for the Imax B3_PRO

• Input Voltage: AC 110V-240V
• Balance Charge Current: 850mA
• LED Display: Dual-color (Red/Green) for charge status
• Compact Design: Lightweight and portable at 180g
• Dimensions: 90mm x 55mm x 35mm

Practical advantages over similar chargers

Compared with many entry-level chargers, the Imax B3_PRO can handle 3-cell LiPo packs with a steady 850mA balance current while remaining a light 180g unit. Its straightforward control and LED status make it suitable for both newcomers and seasoned RC users who want a no-fuss charger.

Basic charging steps for the Imax B3_PRO

1. Plug the charger into AC power; LEDs indicate power readiness by changing state.
2. Attach the battery to the matching balance connector (select 2S or 3S as appropriate); the charger will signal charging with the LED colour.
3. Wait until the LEDs show green to confirm the pack has reached full charge, then disconnect the battery.