HPI Baja Front Nylon Rim Frame Alloy 10-Pole Face BJ1003F by GPM  [BJ1003F]

HPI Baja Nylon Front Rims Frame With Alloy 10 Poles Pattern - GPM BJ1003F
Price:
CAD$107.73
Brand:
GPM
Model:
BJ1003F
GTIN:
4894538025002
Condition:
Brand New
Write a review
alt="HPI Baja Nylon Front Rims Frame With Alloy 10 Poles Pattern - GPM BJ1003F" title="HPI Baja Nylon Front Rims Frame With Alloy 10 Poles Pattern - GPM BJ1003F"
alt="HPI Baja Nylon Front Rims Frame With Alloy 10 Poles Pattern - GPM BJ1003F" title="HPI Baja Nylon Front Rims Frame With Alloy 10 Poles Pattern - GPM BJ1003F"
alt="HPI Baja Nylon Front Rims Frame With Alloy 10 Poles Pattern - GPM BJ1003F" title="HPI Baja Nylon Front Rims Frame With Alloy 10 Poles Pattern - GPM BJ1003F"

Aftermarket front rim for HPI Baja

This front rim frame is made to fit HPI Baja scale buggies and carries the model number BJ1003F. The assembly pairs a molded nylon carrier for structural support with an alloy ten-pole face that adds local stiffness and visual detail to the wheel face.

Built as a replacement or upgrade, this component focuses on wheel mounting integrity and consistent behaviour under off-road loads. It is intended to work with standard Baja wheel hubs and common wheel hardware; check your wheel hex and offsets before fitting to ensure proper fitment.

Installation is straightforward for hobbyists who service wheels: remove the wheel, seat the rim frame onto the hub, and secure with the original wheel fasteners. Tuning notes: the nylon carrier gives controlled flex for impact absorption, while the alloy face shifts some mass toward the rim edge and can slightly affect rotational inertia.

Specifications

  • Item: Front Rims Frame
  • Material: Nylon and Alloy
  • Model Number: BJ1003F
  • Compatibility: HPI Baja

Choose the BJ1003F rim frame when you need to replace a damaged front carrier or want a specific balance of nylon flexibility and alloy-pattern stiffness on your HPI Baja.

Will this rim frame fit every HPI Baja wheel?

This rim frame is made for HPI Baja platforms, but you should verify your wheel hub hex size and offset match the rim frame before buying to avoid fit issues.

What basic tools do I need to fit it?

You will only need common hand tools used for wheel removal and refit, such as the correct hex drivers or sockets for your wheel fasteners; reuse the original hardware where possible.

How do I check for damage after a run?

After running, wipe off grit, inspect mounting holes and the carrier for cracks or deformation, and replace the rim frame if seating or balance is compromised.

Will this change handling or wheel feel?

The nylon carrier allows some controlled flex to absorb impacts while the alloy face increases local stiffness and visual weight at the rim, which can subtly alter rotational feel and wheel response.

Copyright © 2008-2026 rcjaz.ca All rights reserved