Hot Bodies Cyclone Sport Front SSG Graphite Shock Tower CY-12S/SG by 3Racing  [CY-12S/SG]

Front shock tower upgrade

This front SSG graphite shock tower is an aftermarket replacement designed for the Hot Bodies Cyclone Sport Version chassis. It matches the Cyclone Sport mounting pattern so you can swap the front tower while retaining your existing dampers and most hardware.

From a setup perspective the tower locates the front dampers and influences suspension geometry under load. Graphite usually increases local stiffness compared with plastic parts, which alters steering feedback and small-bump compliance when you adjust camber, toe or roll centre via shock positions.

Installation follows standard RC practice: remove the stock tower, align the mounting holes, and secure with the original screws where possible. Because hardware inclusion is not guaranteed, check the seller notes or package contents before assuming mounting screws are supplied.