Hot Bodies Cyclone Pivot Mount Shim CY-34 0.5mm & 1mm for Chassis Tuning by 3Racing  [CY-34]

Graphite pivot shims for Cyclone setup

This graphite pivot mount shim set provides accurate spacing control at the pivot/mount area for compatible Cyclone variants. The included 0.5mm and 1mm shims let you make small, repeatable adjustments to pivot clearance and alignment without swapping major parts, helping you refine handling across different track surfaces.

Fitting is simple for anyone comfortable with basic chassis servicing: loosen the pivot mount fasteners, place the chosen shim between the mating surfaces, then re-torque the mounting screws to the correct spec. Keep contact faces free of dirt and avoid over-tightening, which can crush the shim and change the intended spacing.

Tuning advice: use the 0.5mm shim to remove slight binding or restore clearance, and the 1mm shim when a larger offset is needed to correct alignment or alter effective suspension geometry. These graphite shims add negligible weight and are ideal for step-by-step setup sessions.

Compatible models

• Hot Bodies Cyclone Sport Version
• Hot Bodies Cyclone Racing Version