Hobbywing 30901015 XRotor Micro 40A ESC Compact FPV Controller  [HW-30901015]

HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015
Price:
CAD$0.00
Brand:
Hobbywing
Model:
HW-30901015
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015" title="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015"
alt="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015" title="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015"
alt="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015" title="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015"
alt="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015" title="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015"
alt="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015" title="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015"
alt="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015" title="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015"
alt="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015" title="HOBBYWING XRotor Micro 40A BLHeli_32 DShot1200 - 30901015"

Compact High performance ESC for fpv pilots

The Hobbywing XRotor Micro 40A ESC, model number 30901015, is built to satisfy the demands of 130-300mm FPV pilots. It uses a 32-bit ARM processor at 48MHz together with imported MOSFETs and ceramic capacitors, and runs third-generation BLHeli_32 firmware to deliver consistent performance and durable operation.

Responsive throttle and quiet running

Hardware-generated PWM gives the XRotor Micro 40A a smooth throttle feel and low noise. The damped light feature supports regenerative braking for faster motor slowdown and effective freewheeling.

Flexible setup and safety features

With BLHeli_32 you can use passthrough from a flight controller running Cleanflight or Betaflight to adjust parameters and update firmware across multiple ESCs. Built-in protections for temperature, low voltage and overcurrent help extend service life.

LED visibility and beacon locate aid

The adjustable LED makes status easier to see on the bench or in the air, while the beacon function triggers a motor beep when throttle is at zero for a set time to help recover a lost model.

Specifications

  • Continuous/Peak Current: 40A / 60A
  • LiPo Cells: 3-6S
  • BEC Output: None
  • Output Wires: Solder tabs
  • Input Connectors: None
  • Output Connectors: None
  • Firmware: BLHeli_32
  • ESC Programming: Supported
  • Stick Programming: BLHeliSuite
  • DEO: Supported
  • Throttle Range Calibration: Supported
  • Oneshot125 Mode: Supported
  • Oneshot42 Mode: Supported
  • MultiShot Mode: Supported
  • Timing: Supported
  • Motor Rotation: Supported
  • Size: 32.7x18.4x6.2mm
  • Weight: 11.5g
  • Applications: 130-300mm FPVs

Can this ESC run on a 6S pack?

Yes. The XRotor Micro 40A supports 3-6S LiPo setups, so 6S packs are within its supported range when sized appropriately for your motors and props.

How do I update or tune the BLHeli_32 firmware?

Use BLHeliSuite with passthrough from a flight controller flashed with Cleanflight or Betaflight, or use a compatible programmer. Passthrough lets you adjust multiple ESCs without removing them from the frame.

Does the ESC have a locator or beep feature?

Yes. The built-in beacon will pulse the motors when throttle is at zero for a set interval to aid in locating a downed craft.

Copyright © 2008-2026 rcjaz.ca All rights reserved