GT500 Ball Differential Assembly for Drivetrain Tuning - YOKGT-24BF by Yokomo  [YOKGT-24BF]

GT500 Ball Differential: Key Details

This Yokomo YOKGT-24BF GT500 Ball Differential Assembly is a direct replacement part for GT500-class 1/10 touring cars where a ball-type differential is preferred. It alters torque transfer and center differential behavior within the GT500 drivetrain without implying any association with road vehicle manufacture.

The unit installs into the GT500 differential housing and interfaces with the existing internal gears and axle components. As a ball differential, it controls rotational slip using bearing balls and preload adjustment rather than meshed gear teeth, giving finer gradations of drive distribution for traction and handling tuning on 1/10 touring platforms.

When fitting the assembly, confirm alignment with the GT500 differential carrier and secure the fastenings to the original mounting points. Typical adjustments to differential feel are made by altering preload or adding shims where the chassis supports it, and by choosing differential grease viscosity that matches the desired slip characteristics.

Intended for hobby use on GT500 class RC touring cars where the tuning range of a ball differential is needed; verify fit before installation and perform routine cleaning and lubrication to keep performance consistent.