GT Carbon Steering Block Plate 3mm (2) - XRAY 352365  [XR-352365]

XRAY 352365 GT Carbon Steering Block Plate 3mm (2)
Price:
CAD$30.63
Brand:
XRAY
Model:
XR-352365
Condition:
Brand New
Write a review

How this plate sharpens steering

The XRAY 352365 GT Carbon Steering Block Plate is a precision RC component that increases the outside wheel steering angle, producing a noticeably sharper steering response on GT-style cars.

Delivered as a pair of 3mm carbon plates, the parts modify the steering block geometry to provide a more aggressive front-end reaction without altering major suspension components. The change yields quicker turn-in and clearer feedback when refining steering balance for track sessions.

Fitting is straightforward for experienced hobbyists: remove the existing steering block plate, install the carbon plate in the same location using your vehicle's hardware, align both sides evenly, and recheck toe and steering geometry after installation. Minor adjustments to link lengths or bump steer settings may be necessary to dial in handling.

Specifications

  • Item: XRAY 352365 GT Carbon Steering Block Plate 3mm (2)
  • Material: Carbon
  • Model Number: 352365
  • Compatibility: GT

Fit these carbon plates when you need increased outside-wheel steering bite to improve turn-in and front-end response, then trim toe and linkage lengths to integrate the change into your overall setup.
Remark :
Due to limited stock availability, please notice that some XRAY items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How will my handling change after installing the plate?

Expect a bigger outside-wheel steering angle and crisper turn-in. The car will feel more responsive at the front, but you may need small trim tweaks to restore balance.

Is this part compatible with every GT chassis?

This plate is intended for GT-style steering blocks. Confirm your steering block mounting layout and clearance for a 3mm plate before ordering.

Will I need extra screws or nuts to fit it?

Most installs reuse the existing hardware. Inspect fasteners and replace worn pieces if needed, and verify torque after installation.

What setup steps should I take after fitting the plate?

Begin with small toe and steering trim changes, then test on a consistent surface to evaluate front-end bite and adjust link lengths to fine-tune balance.

Copyright © 2008-2026 rcjaz.ca All rights reserved