Graphite +1mm Bulkhead Plate for ARC A11 - O-ARCP010 by Factory Pro  [FP-O-ARCP010]

Price:
CAD$15.51
Brand:
Factory Pro
Model:
FP-O-ARCP010
Condition:
Brand New
Write a review

ARC A11 +1mm Graphite Bulkhead Plate Overview

These graphite bulkhead plates are made for the ARC A11 chassis and are supplied as a matched pair (2 pcs). The +1mm designation indicates a thicker profile than standard replacement plates, intended to adjust local chassis stiffness and refine flex characteristics on 1/10 electric touring cars.

The part replaces the stock bulkhead plates on ARC A11 chassis while using the original mounting points and preserving the base geometry. Graphite material delivers a balance of rigidity and vibration damping common to composite RC components, and the pair covers both left and right mounting locations.

Installation notes: fit the plates into the factory mounting positions, confirm suspension and drivetrain alignment, and inspect for any interference with adjacent parts. Use hardware from your kit or spares pack for attachment, and check symmetry before final tightening. This item is offered as a chassis tuning option to alter handling across different track surfaces.

How will the +1mm thickness change handling?

The extra 1mm increases local stiffness at the bulkhead, which typically reduces chassis flex in that area and sharpens turn-in. Expect subtle shifts in balance rather than wholesale geometry changes.

Do these fit the ARC A11 without modification?

Yes. The plates are produced to match the ARC A11 mounting layout and install using the original attachment points with no trimming required.

What does the package include?

Supplied as one matched pair of graphite bulkhead plates for both sides. Verify you have the appropriate screws from your kit or spares; mounting hardware is not always included.

Copyright © 2008-2026 rcjaz.ca All rights reserved