GPM TRAXXAS Tmaxx 3.3/Tmaxx 2.5 Alloy Front/Rear Upper Arm TMX2054W - RC Spare Part  [TMX2054W]

TRAXXAS Tmaxx 3.3 /Tmaxx 2.5 Alloy Front/Rear Upper Arm With Screws & Pin & Collars & E-clips -1pr set (Trx 2.5) - GPM TMX2054W
Price:
CAD$23.38
Brand:
GPM
Model:
TMX2054W
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Replacement alloy upper arms for Tmaxx

This aftermarket front and rear upper arm set is a scale replacement designed for TRAXXAS Tmaxx 3.3 and Tmaxx 2.5 models. Machined from alloy, the kit is supplied with mounting hardware sized to match the stock upper arm attachment points.

Use the set to replace bent or worn arms, restore correct suspension geometry, and create a stable baseline for setup changes. The package includes screws, a locating pin, collars and E-clips so you can fit the arms to the existing chassis and hub mounting points.

Installation tips: confirm left/right orientation for front and rear positions and either reuse factory hex screws where specified or fit the supplied fasteners if they match your thread sizes. Verify thread engagement and E-clip seating during reassembly to ensure secure link operation.

Specifications

  • Item: Front/Rear upper arm set with hardware (1 pr set)
  • Material: Alloy
  • Model Number: GPM TMX2054W
  • Compatibility: TRAXXAS Tmaxx 3.3 / Tmaxx 2.5

Fit this alloy upper arm set to maintain suspension alignment and allow precise camber and toe adjustments on TRAXXAS Tmaxx 3.3 and 2.5 trucks, replacing worn parts with a hardware-inclusive kit.

Will these upper arms directly replace the stock plastic arms?

They are designed to match the stock mounting points for TRAXXAS Tmaxx 3.3 and 2.5, allowing direct replacement in most standard builds; check fitment before completing installation.

What hardware comes with the kit?

The kit includes screws, a locating pin, collars and E-clips. Confirm thread sizes against your chassis and consider reusing OEM hex screws where appropriate.

Do I need special tools to fit these arms?

Standard RC hand tools like hex drivers and pliers for E-clip seating are sufficient; work on a clean bench and check fastener torque as you reassemble the suspension.

Can I use these to alter handling or are they only a replacement?

These arms restore geometry and provide a solid platform for tuning camber and toe, but they are not adjustable hop-ups; use them as a durable base for other suspension upgrades.

Copyright © 2008-2026 rcjaz.ca All rights reserved