GPM TRAXXAS Rustler VXL Alloy Steering Assembly with Bearings - RUS048 - RC Spare Part  [RUS048]

TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048
Price:
CAD$33.01
Brand:
GPM
Model:
RUS048
GTIN:
4894538137958
Condition:
Brand New
Write a review
alt="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048" title="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048"
alt="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048" title="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048"
alt="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048" title="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048"
alt="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048" title="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048"
alt="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048" title="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048"
alt="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048" title="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048"
alt="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048" title="TRAXXAS 1/10 Rustler VXL Alloy Steering Assembly With Bearings - 1set - GPM RUS048"

Alloy steering upgrade for Rustler VXL

This alloy steering assembly is an aftermarket replacement made for the TRAXXAS 1/10 Rustler VXL and includes fitted bearings to reduce friction at pivot points. It replaces common plastic components to sharpen steering response and provide a firmer mounting location.

Installation uses the vehicle's original steering geometry and mounting points, so the stock linkage and servo connections are normally retained. The assembly works with standard hobby servos and common tie rod hardware, making it suitable for routine maintenance or basic tuning changes.

For setup, consider how increased steering stiffness interacts with suspension and servo selection. A stiffer alloy unit improves feedback and reduces slop but shifts more load to linkages and the servo. Inspect bearings regularly and secure fasteners before high-impact driving.

Specifications

  • Item: Alloy steering assembly with bearings, 1 set
  • Material: Alloy
  • Model Number: RUS048
  • Compatibility: TRAXXAS 1/10 Rustler VXL

This alloy steering assembly RUS048 gives Rustler VXL owners a durable, straightforward upgrade to tighten steering feel without complex changes.

This item is compatible with

  • TRAXXAS Rustler VXL

Will this slot straight into the Rustler VXL chassis?

Yes, it is designed to match the Rustler VXL mounting points so most users can install it with existing linkage hardware and without modifying the chassis.

Are the bearings serviceable or sealed for life?

The set includes fitted bearings; keep them clean and lightly lubricated as part of routine maintenance and replace any that develop play or roughness.

Will a stock servo cope with the alloy assembly?

Stock servos handle normal running, but if you notice binding or heavy loads during bashing, consider upgrading to a higher-torque servo.

Any tips for installation torque and fasteners?

Use thread locker on metal-to-metal fasteners where appropriate, tighten to a moderate torque and recheck after the first few runs to prevent loosening.

Copyright © 2008-2026 rcjaz.ca All rights reserved