GPM TRAXXAS MAXX Motor Gear 16T TXMS016TS - RC Spare Part  [TXMS016TS]

TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS
Price:
CAD$12.51
Brand:
GPM
Model:
TXMS016TS
GTIN:
4894538335514
Condition:
Brand New
Write a review
alt="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS" title="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS"
alt="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS" title="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS"
alt="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS" title="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS"
alt="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS" title="TRAXXAS MAXX MONSTER TRUCK Harden Steel #45 Motor Gear 16T - 2pc set - GPM TXMS016TS"

16T steel motor gear for drivetrain tuning

This 16T motor gear is a direct replacement for TRAXXAS MAXX drivetrains, part code TXMS016TS. It interfaces with the motor pinion to transfer torque while maintaining correct gear engagement.

The material is hardened steel #45, selected for resistance to wear and for dimensional stability under typical RC loads. The gear is supplied as an aftermarket option to restore or extend service life and improve engagement consistency in scale RC use.

Installation notes: set the motor so mesh is aligned, ensure the pinion seats properly, fit and tighten the supplied 4x4 set screw, and recheck mesh and fasteners after the first run to prevent premature wear.

Packing includes

  • Motor Gear - 1pcs
  • 4x4 Set Screw - 1pcs

Original Name / Part No:

6489X

This item is compatible with

  • TRAXXAS-1/10 MAXX MONSTER TRUCK-89076-4

Will this gear fit my stock TRAXXAS MAXX motor pinion?

Check your motor pinion tooth count and shaft diameter against the vehicle's pinion specifications; the gear mates to standard motor pinions used on MAXX platforms but confirm fit before installation.

How many pieces come in the package?

The packing list shows one motor gear and one 4x4 set screw included in the box.

What is the best way to set gear mesh?

Position the motor for minimal backlash, tighten the set screw gently then tighten to spec, run the vehicle briefly and recheck the mesh and set screw for secure engagement.

Copyright © 2008-2026 rcjaz.ca All rights reserved