GPM BMT057A/ST HPI Bullet 3.0 MT and ST Rear Adjustable Tie Rod  [BMT057A/ST]

HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST
Price:
CAD$20.58
Brand:
GPM
Model:
BMT057A/ST
GTIN:
4894538028782
Condition:
Brand New
Write a review
alt="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST" title="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST"
alt="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST" title="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST"
alt="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST" title="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST"
alt="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST" title="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST"
alt="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST" title="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST"
alt="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST" title="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST"
alt="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST" title="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST"
alt="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST" title="HPI Bullet 3.0 Mt And St (Nitro Engines) Spring Steel Rear Adjustable Tie Rod With Alloy Ends(4mm Anti Cross-thread, To Extend 78mm-85mm) - 1pr set - GPM BMT057A/ST"

Adjustable rear link for HPI Bullet 3.0 MT and ST

This rear adjustable tie rod is an RC-scale replacement part for the HPI Bullet 3.0 MT and ST nitro models, designed to provide a robust, adjustable connection at the rear suspension assembly.

It is built around a spring steel shaft with alloy end fittings and incorporates a 4mm anti cross-thread detail. The rod extends from 78mm up to 85mm, enabling precise rear toe and geometry tweaks without altering other chassis pieces.

Installed in the factory rear tie rod positions, the unit offers direct-fit compatibility with the HPI Bullet 3.0 MT and ST (Nitro Engines) platform and is suitable for routine setup and track-side tuning tasks.

Will this replace the stock rear tie rod on Bullet 3.0 MT/ST?

Yes. The part is made to fit the factory rear tie rod mounting points on HPI Bullet 3.0 MT and ST nitro models.

How do I set the correct length?

Turn the alloy end fittings until the overall length is between 78mm and 85mm, then lock the adjustment with the grub screws or jam nuts supplied with your setup.

Is the thread design resistant to cross-threading?

The alloy ends use a 4mm anti cross-thread feature to reduce thread damage during setup, but you should still align components carefully when assembling.

Copyright © 2008-2026 rcjaz.ca All rights reserved