GPM Axial SCX10 48 Pitch 83T Steel Spur Gear SSCX083T Pack  [SSCX083T]

Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 83T - 1pc set (For SCX10, Wraith) - GPM SSCX083T
Price:
CAD$16.44
Brand:
GPM
Model:
SSCX083T
GTIN:
4894538165890
Condition:
Brand New
Write a review
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 83T - 1pc set (For SCX10, Wraith) - GPM SSCX083T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 83T - 1pc set (For SCX10, Wraith) - GPM SSCX083T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 83T - 1pc set (For SCX10, Wraith) - GPM SSCX083T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 83T - 1pc set (For SCX10, Wraith) - GPM SSCX083T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 83T - 1pc set (For SCX10, Wraith) - GPM SSCX083T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 83T - 1pc set (For SCX10, Wraith) - GPM SSCX083T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 83T - 1pc set (For SCX10, Wraith) - GPM SSCX083T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 83T - 1pc set (For SCX10, Wraith) - GPM SSCX083T"
alt="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 83T - 1pc set (For SCX10, Wraith) - GPM SSCX083T" title="Axial Racing SCX10 Steel#45 Spur Gear 48 Pitch 83T - 1pc set (For SCX10, Wraith) - GPM SSCX083T"

SCX10 and Wraith spur gear summary

This 48 pitch, 83 tooth spur gear SSCX083T is made from steel #45 and supplied as a single replacement part for Axial SCX10 and Wraith scale drivetrains. It is intended to restore correct mesh and provide robust tooth engagement for typical crawler use.

Installation guidance: confirm pinion engagement and set backlash before finalising mesh, only apply thread locker where your axle or gearbox maker recommends it, and manually rotate the drivetrain to verify smooth operation. Fit correct bearings and shims to eliminate axial play that can speed up wear.

Performance role: replacing a worn spur with this steel SSCX083T preserves the existing gear ratio unless you change the pinion, and improves wear resistance versus softer materials to extend drivetrain life during rock crawling and heavy sessions.

Compatible Models

  • SCX10
  • Wraith

What material is SSCX083T made from?

The SSCX083T is specified as steel #45, chosen for wear resistance suitable for scale crawler drivetrains.

Will SSCX083T fit my SCX10 gearbox?

This item is produced for Axial SCX10 and Wraith platforms; you should check that your gearbox accepts a 48 pitch, 83T spur before fitting.

Any break-in or bedding advice?

After install, run the drivetrain by hand under light load and recheck mesh to ensure even contact before heavy use.

Copyright © 2008-2026 rcjaz.ca All rights reserved