GPM AXIAL Racing SCX10 II Aluminium front and rear axle housings SCX2012 Pack  [SCX2012]

AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012
Price:
CAD$136.60
Brand:
GPM
Model:
SCX2012
GTIN:
4894538078831
Condition:
Brand New
Write a review
alt="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012" title="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012"
alt="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012" title="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012"
alt="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012" title="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012"
alt="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012" title="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012"
alt="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012" title="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012"
alt="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012" title="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012"
alt="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012" title="AXIAL Racing SCX10 II Aluminium Front/Rear AXLE Housing - 1set (AX31401) - GPM SCX2012"

CNC aluminium axle shells for AXIAL Racing SCX10 II

This CNC-machined 6061-T6 aluminium front and rear axle housing set is produced to match the original gear locations, permitting direct fitment to the stock axle gear assembly for AXIAL Racing SCX10 II scale crawlers. The metal shells give higher abrasion and impact resistance versus the factory plastic housings when the axle contacts rocks or ground during crawling.

The set is designed as an aftermarket chassis upgrade to lower the chance of component damage from repeated ground strikes while keeping original gear alignment and mounting points. The housings have threaded holes sized to accept the supplied stainless fasteners and are suitable where a metal housing is preferred for durability and predictable axle protection tuning.

The package includes the stainless screws listed below, intended to fasten the housing and cover; no extra parts are supplied.

  • 3X25 Stainless Steel Button Head Screw - 1pcs
  • 2.5X16 Stainless Steel Cap Head Screw - 4pcs

Specifications

  • Item: Aluminium front/rear axle housing set
  • Material: 6061-T6 aluminium
  • Model Number: SCX2012
  • Compatibility: AXIAL Racing SCX10 II

Fit these housings to replace worn plastic shells or to install a metallic upgrade that reduces trail damage while retaining stock gear alignment and mounting points on AXIAL Racing SCX10 II models.

This item is compatible with

  • AXIAL SCX10 II

Will SCX2012 housings accept the original axle gears without modification?

Yes. These housings are CNC-machined to align with the original gear positions on AXIAL Racing SCX10 II, so they install with stock axle gears when mounted to compatible axle assemblies.

Why is 6061-T6 aluminium used for these housings?

6061-T6 is chosen for its balance of strength and machinability, offering greater abrasion and impact resistance compared with common plastic housings used on scale crawlers.

Are the fasteners supplied with the kit?

The package includes the listed stainless screws: one 3x25 button head and four 2.5x16 cap head screws to secure the housing and cover.

Any setup advice before running?

Hand-fit the housings first to confirm gear mesh and shaft alignment, then tighten screws progressively. Check full suspension travel to ensure no binding before final use.

Copyright © 2008-2026 rcjaz.ca All rights reserved