TP flat head screw M2.6x12 supplied as a 10-piece pack for routine replacement on 1/10 touring and FW-series chassis parts. These countersunk fasteners are intended where a flush head is needed and suit body mounts, shock towers, servo brackets and other fittings accepting M2.6 thread.
Use a driver that exactly matches the screw head profile to prevent cam-out and head damage. Make sure the countersunk head sits flush with the mating surface and avoid overtightening - small screws can strip more easily than larger hardware. For durable metal-to-metal joints consider a low-strength threadlocker; avoid permanent adhesives on plastic threads unless the mating part has metal inserts.
Keep the 10-piece set in the pit box so you have matching spares during setup or after a crash. Always check whether the hole is a tapped metal thread or a self-tapping plastic hole before reuse to avoid cross-threading.
Copyright © 2008-2026 rcjaz.ca All rights reserved
