FW-06 14-Spoke Replacement Wheel 24mm - Kyosho VZH008BK (2pcs)  [KY-VZH008BK]

Kyosho VZH008BK - Wheel (14-Spoke/Black/24mm/2pcs)
Price:
CAD$0.00
Brand:
Kyosho
Model:
KY-VZH008BK
GTIN:
4548565266647
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Slim 14-spoke wheel for FW-06 chassis

This black 14-spoke wheel is supplied as a pair (2pcs) and is designed as a direct replacement for FW-06 family vehicles. The 24mm size matches the standard mounting profile used on these models, making the wheels useful for tyre swaps and routine replacement of worn items.

Installation and setup tips:

  • Verify hub and hex engagement before final tightening to ensure correct alignment with FW-06 hubs.
  • Keep your original wheel nuts and washers where possible to preserve tracking and clearance.
  • Balance tyres after mounting if you run a precision setup; tape or small stick-on weights inside the tyre are common fixes.
  • Inspect wheels for cracks or distortion during checks; replacing both sides on the same axle helps keep handling predictable.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which FW-06 models accept these wheels?

These wheels follow the FW-06 fitment pattern. Check hub diameter and hex size on your specific chassis to confirm compatibility before fitting.

Do I need tyre inserts with these wheels?

Inserts are optional and depend on tyre construction and driving style. Foam inserts give steadier ride height, while some flexible tyres run fine without inserts.

Are these wheels supplied pre-balanced?

No pre-balancing is provided. If you need precise handling, balance each tyre after mounting using tape or small internal weights.

Will I need special hardware to fit them?

No special hardware is required beyond standard hex drivers. Reuse the original wheel nuts and washers to keep clearance and tracking consistent.

Copyright © 2008-2026 rcjaz.ca All rights reserved