Futaba S5050 High-Torque Digital Servo 1/4 Scale  [S5050]

Futaba S5050 Servo Digital High-Torque 1/4 Scale
Price:
CAD$146.49
Brand:
Futaba
Model:
S5050
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Powerful digital servo built for large RC models

The Futaba S5050 is a 1/4 scale digital servo engineered for radio-controlled models that demand higher torque for big control surfaces and heavy linkage setups.

This unit suits RC airplanes, 1/5 scale gas cars and power boats where one high-capacity servo can take the place of dual units on elevators or ailerons. Manufacturer features include metal gears, dual ball bearings, a 5-pole motor and dust- and water-resistant construction. The servo is fitted with a Futaba J male connector and ships with several horn options and mounting hardware for common installations.

Packing includes

  • 1 pcs S5050 High Torque 1/4 Scale Digital Servo with Futaba J male connector
  • 4 pcs brass eyelets
  • 4 pcs large black rectangular rubber grommets
  • 4 pcs 2 x 11mm servo mounting screws
  • 3 pcs servo horns (1 large round FUTM2035, 1 large X, 1 small 6-arm)
  • 1 pcs 3 x 8mm servo horn screw

Specifications

  • Item: Futaba S5050 High-Torque 1/4 Scale Digital Servo
  • Material: Metal gears, dual ball bearings
  • Model Number: S5050
  • Speed: 0.25 sec/60° @ 4.8V, 0.20 sec/60° @ 6.0V
  • Torque: 211 oz-in (15.2 kg·cm) @ 4.8V, 264 oz-in (19.0 kg·cm) @ 6.0V
  • Dimensions: 59 x 29 x 50 mm (2.3 x 1.1 x 2.0")
  • Weight: 127 g (4.5 oz)
  • Connector: Futaba male J type with approx. 5" wire

Compatibility

  • RC airplanes
  • 1/5 scale gas cars
  • Power boats

When a single, higher-capacity servo is preferred for elevators, ailerons or heavy control surfaces, the S5050 delivers a metal-gear digital solution with included mounting hardware and multiple horn options to simplify installation and setup in large-scale RC models.

Which model types commonly use the S5050?

This servo is intended for large-scale applications such as RC airplanes, 1/5 scale gas cars and power boats where high torque is required for large control surfaces or to replace two smaller servos.

What hardware comes in the box for mounting?

The package includes the S5050 with Futaba J male connector, brass eyelets, rubber grommets, four mounting screws, three servo horns (large round FUTM2035, large X and small 6-arm) and a horn screw to suit common installation needs.

What are the listed speed and torque figures?

Manufacturer ratings show 0.25 sec per 60 degrees at 4.8V and 0.20 sec per 60 degrees at 6.0V, with torque at 211 oz-in (15.2 kg·cm) at 4.8V and 264 oz-in (19.0 kg·cm) at 6.0V.

Is the housing sealed against dust and water?

The S5050 features dust- and water-resistant construction for use in exposed conditions, but careful installation and additional sealing are recommended for prolonged wet exposure.

What connector and wire length are provided?

The servo is supplied with a Futaba male J type connector and approximately 5 inches of wire; the heavier gauge leads help reduce voltage drop during high-load operation.

Copyright © 2008-2026 rcjaz.ca All rights reserved