Starter transmitter package overview
This package pairs a Futaba-style 2PSK 2.4GHz FHSS two-channel transmitter with an R202GF receiver and a basic hardware bundle tailored for 1/10 scale electric RC cars. The kit supplies the essential radio link plus an entry-level analog steering servo, a 5000mAh Ni-MH battery and a charger so the chassis can be driven and trimmed without extra sourcing.
Design intent and role: the transmitter is a two-channel stick radio handling steering and throttle/brake, the R202GF receiver converts FHSS frames to standard PWM outputs for a servo and an ESC, and the included servo and battery provide the mechanical and electrical baseline required for initial setup and tuning.
Installation notes: mount the receiver away from heavy motor wiring and secure it inside the chassis, install the servo on the steering horn and the ESC on the throttle channel, then perform the transmitter bind sequence to pair with the R202GF. Use trim and endpoint adjustments on the transmitter to center steering and establish throttle range before testing.
Tuning role: intended for basic control mapping and setup — fine-tune steering trim, subtrim and throttle endpoints on the transmitter, confirm receiver failsafe behavior and verify servo centering with the model held static. Check mechanical alignment and gear mesh for consistent steering feel.
Packing includes
- Futaba 2PSK 2.4GHz 2-Channel FHSS Transmitter with R202GF Receiver - 1 set
- Jazrider TWSV4140 high-torque standard analog servo - 1 pcs
- Jazrider 5000mAh Ni-MH battery - 1 pcs
- Jazrider battery charger - 1 pcs
Specifications
- Item Jazrider Futaba 2PSK beginner transmitter combo
- Material electronic components and molded plastic housings
- Model Number JR-2PSK-Combo
- Compatibility 1/10 scale electric RC cars using standard servo and receiver form factors
Compatibility
This kit is intended for 1/10 scale electric RC cars that accept standard-size servos and a compact receiver module; verify receiver bay and battery compartment clearance on your chassis before installation.
As a starter radio bundle, the set supplies a complete radio link and the core drive-side components needed for initial setup and on-track trimming, easing integration into most 1/10 electric touring and basher chassis that use standard servo and receiver footprints.
