For Kyosho Mini Inferno ST / Mini Inferno 09 Front Adjustable Spring Damper 63mm - MIF363 by GPM  [MIF363]

Alloy front spring damper for Mini Inferno setups

This front spring damper is made for Kyosho Mini Inferno ST and Mini Inferno 09 platforms and is supplied as a single pair, model MIF363 from GPM. The assembly uses alloy parts and a 63mm length with an alloy ball top that mates to standard front suspension mounts.

Use case: it replaces the original front dampers to add mechanical adjustment for spring preload and to alter damper geometry while setting up handling. The alloy build gives a stiffer mounting point and consistent ball-top interface for steering link and tower connections.

Fitting tips: the pair includes the screws, alloy collars, and 3mm lock nuts listed in the product title so the dampers bolt into the existing front suspension location on compatible Mini Inferno ST / Mini Inferno 09 chassis. Use the correct hex driver and tighten by hand to avoid overtightening the lock nuts, then verify steering linkage clearance after installation.

Tuning notes: treat these as replacement mechanical dampers rather than a full cartridge damper; they provide a fixed ball-top and adjustable spring preload to help dial ride height, initial spring response, and front-end balance for track testing or club runs.