FANTOM EP King Pin Bush Pack (POM, 4pcs) - Kyosho EFW024  [KY-EFW024]

Kyosho EFW024 - King Pin Bush(POM/4pcs/FANTOM EP)
Price:
CAD$12.44
Brand:
Kyosho
Model:
KY-EFW024
GTIN:
4548565515073
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

King Pin Bush — suspension pivot bushing

This Kyosho EFW024 king pin bush set is an RC-scale replacement pack intended for the FANTOM EP 4WD chassis, supplied as four POM bushings. The parts are moulded from POM to provide low friction at steering and suspension pivot points, and they serve as direct replacement bushings where original parts show wear or play.

Use this pack when diagnosing steering looseness or when routine servicing requires bushing replacement. The components are passive mechanical spacers for suspension and steering pivots on the model, and they help maintain alignment and reduce unwanted movement at king pin interfaces without changing geometry.

  • Pack content: 4 pcs POM king pin bushings for FANTOM EP 4WD.
  • Function: Replace worn pivot bushings to restore tightness and reduce play in steering and suspension pivots.
  • Material note: POM provides low friction and dimensional stability for hobby-grade use.
  • Maintenance tip: Inspect mating surfaces and clean debris before fitting, avoid over-tightening fasteners that compress the bushings.
Remark :
Due to limited stock availability, please notice that some Kyosho items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What does the pack contain and where do the pieces fit?

The pack includes four POM king pin bushings designed for the pivot locations on the FANTOM EP 4WD chassis; match each bushing to the corresponding pivot bore.

Will these lower steering play on my model?

Yes, fitting fresh bushings often reduces play. Check the mating pins and cap screws and set correct torque to avoid reintroducing slack.

Any tips for fitting the bushings?

Clean the pivot bores before installation, press the bushings in evenly, and tighten fasteners just enough to secure without compressing the POM material.

Copyright © 2008-2026 rcjaz.ca All rights reserved