Eagle I-Type B Replacement Lever for Eagle/Freya/EX/SX - HI0404628 by Hirobo  [HI0404628]

HIROBO 0404-628 EAGLE I-TYPE LEVER B #0404628
Price:
CAD$20.46
Brand:
Hirobo
Model:
HI0404628
GTIN:
4512895108694
Condition:
Brand New
Write a review

Eagle I-Type B lever overview

This is a replacement I-Type lever intended for use in Hirobo Eagle family helicopters and the common parts pool covering Eagle/Freya/EX/SX. The I-Type Lever B serves as the linkage piece in the rotor head, transferring swashplate motion into blade pitch changes for cyclic and collective control.

Confirm compatibility against the Eagle/Freya/EX/SX parts list in your manual or parts diagram before fitting. During installation inspect ball links and linkage pins for wear, confirm full travel without binding, and secure fasteners to the aircraft's recommended torque to avoid loosening in flight.

A worn or loose lever can cause reduced pitch accuracy or uneven cyclic response; replacing this lever is a standard maintenance step to restore crisp control feel in the rotor system.

Is this lever a direct swap for Eagle family helicopters?

It is intended as a replacement within the common parts pool for Eagle/Freya/EX/SX models. Always verify the part number against your helicopter's diagram to confirm a direct swap before installing.

What should I inspect during installation?

Check ball links and linkage pins for play or wear, ensure the lever moves freely without binding, and tighten mounting fasteners to the correct torque to prevent in-flight loosening.

Will replacing this part alter flight tuning?

Yes. Restoring worn linkages typically improves pitch fidelity and cyclic response, so you should notice a more precise control feel after replacement.

Copyright © 2008-2026 rcjaz.ca All rights reserved