DP-RS13SP Front Slide Rack Upgrade Y2-202SLR Yokomo  [Y2-202SLR]

Yokomo Y2-202SLR jp
Price:
CAD$184.24
Brand:
Yokomo
Model:
Y2-202SLR
GTIN:
639342173709
Condition:
Brand New
Write a review
alt="Yokomo Y2-202SLR jp" title="Yokomo Y2-202SLR jp"

Front slide rack and integrated bulkhead

This red anodized aluminum slide rack set is an RC-scale front slide rack and bulkhead assembly engineered to replace the stock front rail on supported drift and touring platforms. The unit uses milled rails and a machined bulkhead to reduce mass in the front section while keeping structural contact points rigid.

When installed on a compatible resin chassis the added front stiffness helps reduce the tendency for the front tyre to hook during corner entry, producing a steadier steering response. The forward-tilted slide rack geometry is configured to generate an Ackermann curve suited to drift setups, giving finer control over inside and outside wheel angles while sliding.

Swap-in installation follows the usual slide rack routine: remove the stock front rail, align the new bulkhead with the original chassis mounting points and secure using the chassis hardware. No extra parts are typically required beyond those listed for the compatible chassis. Expect changes to initial steering bite; adjust toe, steering throw and suspension settings to rebalance understeer and oversteer for your preferred setup.

Specifications

  • Item: Slide rack set with integrated front bulkhead
  • Material: Aluminum, red anodized
  • Model Number: Y2-202SLR
  • Compatibility: See compatible models list below

Compatible Models

  • DP-GR86
  • DP-GR86G
  • DP-GR86RTRG
  • DP-GR86RTRW
  • DP-GR86W
  • DP-GRA90
  • DP-GRA90R
  • DP-GRA90W
  • DP-YD2
  • DP-YD2AC
  • DP-YD2ACA
  • DP-YD2E
  • DP-YD2EG
  • DP-YD2EPLS
  • DP-YD2EX
  • DP-YD2EXR
  • DP-YD2G
  • DP-YD2PLS
  • DP-YD2RAR
  • DP-YD2RPLS
  • DP-YD2RSAR
  • DP-YD2RTRR-1
  • DP-YD2RTRR-2
  • DP-YD2RTRW-1
  • DP-YD2RTRW-2
  • DP-YD2RXR
  • DP-YD2S
  • DP-YD2S-PL
  • DP-YD2SAR
  • DP-YD2SG
  • DP-YD2SSAR
  • DP-YD2SX3R
  • DP-YD2Z
  • DP-YD2ZG
  • DP-YD2ZXR
  • RDR-010
  • RDR-010-1
  • RDR-010G
  • RDR-010G-1
  • RDR-020
  • RDR-020G
  • DPR-GRA90W
  • DPR-GRA90R
  • DPR-GR86G
  • DPR-GR86W
  • DPR-DP
  • DPR-RZ34BL
  • DPR-RZ34R
  • DP-RZ34
  • DP-RZ34BL
  • DP-RZ34R
  • DP-MS15
  • DP-JZXBN
  • DP-MS15BL
  • DPR-MS15
  • DP-RS13SP
  • DP-FCBN

This slide rack set is aimed at drivers seeking a firmer front section and drift-focused Ackermann geometry on compatible DP and RDR platforms; expect a clear change in steering feel that should be balanced by toe and steering-throw adjustments to match your driving style.

Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I install the Y2-202SLR on a DP-YD2 chassis?

The Y2-202SLR installs by removing the stock front rail, positioning the new bulkhead at the original mounting points and securing it with the chassis hardware. Confirm alignment before final tightening to avoid binding.

Does the red anodize need special care?

The anodized finish adds surface protection; keep threaded areas free of debris and use recommended thread locker where your chassis manual specifies. Wipe off grit after track sessions to preserve the finish.

What handling changes come from the forward-tilted rack?

The forward tilt shifts the Ackermann to favor drift-style geometry, often increasing inside wheel angle for slides; you will likely need to reduce steering throw or tweak toe to keep steering predictable.

Will I need to modify the chassis?

No chassis modifications are expected for the models listed. The unit mounts to existing points but always check clearances and alignment before completing the installation.

Copyright © 2008-2026 rcjaz.ca All rights reserved