DP-DPM Front Shock Tower SSG - Yokomo SD-017MS  [SD-017MS]

Yokomo SD-017MS SSG Front Shock Tower for DP-DPM
Price:
CAD$10.36
Brand:
Yokomo
Model:
SD-017MS
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DPM category
Write a review

DP-DPM Front Shock Tower Overview

The Yokomo SD-017MS SSG front shock tower is an RC-scale component built for use with Drift Package DPM setups. It serves as the mounting base for the front shocks and interfaces cleanly with the front assembly of DP-series drift chassis.

Fitment targets the DP-DPM and DP-DPMS chassis families where this tower replaces the stock front shock mounting plate. The SSG tag is part of the model name and distinguishes this tower variant within Yokomo's drift parts lineup.

Installation is straightforward for experienced builders: remove the existing tower, transfer shocks and linkages, and secure the SD-017MS with the original mounting points and hardware. Check alignment and suspension travel after fitting and perform short tests to ensure smooth movement without binding.

Tuning role: the tower sets the front shock mounting geometry. Its location influences shock angle, ride height baseline, and front-end response during drift transitions. Use it to evaluate shock lengths, spring rates, and front roll behavior while keeping the rest of the chassis unchanged.

Compatibility

  • DP-DPM
  • DP-DPMS
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will the SD-017MS fit a DP-DPM chassis without modification?

Yes. The SD-017MS is made for DP-DPM fitment and normally installs using the chassis' original mounting holes and hardware.

What does the SSG label indicate on this tower?

SSG is the specific model designation used to identify this version of the front shock tower within Yokomo's drift parts range.

Are extra parts required to mount the tower?

No special items are usually needed; reuse the chassis' existing front hardware and your current shocks, then verify alignment and suspension travel after installation.

Copyright © 2008-2026 rcjaz.ca All rights reserved