DP-series & MRTC Spur Gear Adapter for Drift - Yokomo D-024A  [D-024A]

Yokomo D-024A Light Weight Spur Gear Adapter DRIFT PACKAGE
Price:
CAD$16.72
Brand:
Yokomo
Model:
D-024A
GTIN:
0639342184835
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DP-DPRA category
Write a review

Reduced-mass spur adapter for drifting

The Yokomo D-024A spur gear adapter is an RC accessory built to cut rotating mass in the drivetrain while offering a blue anodized aluminum finish tailored to drift cars. Its lower inertia on the spur side can yield crisper throttle response and a noticeably sharper transient feel when dialing in drift throttle control.

This part is supplied as a drop-in appearance and weight-reduction upgrade for compatible DP-series and MRTC chassis. Installation needs basic disassembly of the spur gear area and common small drivers; the adapter includes the matching screws for the specified mounting pattern so you can refit the spur assembly without hunting for extra fasteners.

Packing includes

  • Spur Gear Adapter - 1 pcs
  • 3 x 6mm pan head BH screw - 4 pcs
  • 3 x 4mm set screw - 1 pcs

Compatible Models

  • DP-DPRA
  • DP-DPRH
  • SD-RF01
  • DP-DP7C
  • DP-DP8
  • DP-GR35
  • DP-UF86A
  • DP-M786A
  • DP-HKS86A
  • DP-MKXA
  • DP-C33A
  • DP-SC430A
  • DP-TY180A
  • DP-JZX2A
  • DP-BNAA
  • DP-SDA
  • DP-TSFCA
  • DP-EVXA
  • DP-DKPA
  • DP-BS15A
  • DP-REA7A
  • DP-C35A
  • DP-DM13A
  • DP-GDBFA
  • DP-ZCRA
  • DP-1093A
  • DP-TYS15A
  • DP-BL34DA
  • DP-B324RA
  • DP-SR86A
  • DP-PS13A
  • DP-TRS15A
  • DP-JZZ30A
  • DP-DR86A
  • DP-REAA
  • DP-ORCZ33A
  • DP-GDBA
  • DP-JZXA
  • DP-KOS15A
  • DP-IS220A
  • DP-TSS15A
  • DP-BLR34A
  • DP-APEXA
  • DP-HKSA
  • DP-180SXA
  • DP-FC3SA
  • DP-S15A
  • DP-AE86A
  • DP-DRG3
  • MRTC-SD9
  • MRTC-86
  • DP-DRG3G
  • DP-N86R
  • DP-N86W
  • DP-N15R
  • DP-N15W
  • DP-N15S
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this adapter replace the stock spur adapter on the listed models?

For the models shown, the adapter matches the DP-series and MRTC mounting patterns and is supplied with the required screws, so it serves as a direct replacement for the factory unit on those chassis.

Which drivers are needed to fit the adapter?

Basic small drivers are recommended: typically a 3mm driver for the pan head screws and a 3mm hex or set driver for the 3 x 4mm set screw. Standard disassembly of the spur area is required.

What effect does this have on handling?

By cutting rotating mass at the spur, the adapter can make throttle transitions feel quicker and improve transient response, which benefits precision when tuning drift throttle control.

Copyright © 2008-2026 rcjaz.ca All rights reserved