D-Max Slipper Spacer & 2.6mm SHC Screw - Yokomo SD-670S  [SD-670S]

Yokomo SD-670S Slipper Spacer/Screw for D-Max
Price:
CAD$2.25
Brand:
Yokomo
Model:
SD-670S
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DMAX category
Write a review

Spacer kit and 2.6mm SHC screw for D-Max

This RC slipper spacer and 2.6mm SHC screw are made to interface with D-Max standard parts. The kit supplies the essential hardware to alter slipper clutch clearance while keeping the D-Max slipper assembly layout intact.

Application notes: ideal for careful slipper clutch tuning when you need to modify spacing or replace a missing screw during setup and maintenance. The 2.6mm SHC label denotes the screw head type and diameter used across many D-Max standard assemblies.

Fitting tips: verify current slipper stack height and confirm the spacer sits flush before you tighten, avoid excess torque on the 2.6mm SHC screw, and recheck slipper engagement after any adjustment. Intended for RC model use and matched to D-Max standard interfaces.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which D-Max parts accept this spacer?

It is compatible with D-Max standard slipper assemblies, pairing as a spacer with the 2.6mm SHC screw to adjust clutch clearance.

How does the spacer affect engagement?

Changing the spacer alters stack height and shifts engagement point; make small changes and test on-track to find the desired slipper response.

What tools are required to install it?

A hex driver sized for 2.6mm SHC screws plus basic setup checks are all you need; no specialist tools required.

Copyright © 2008-2026 rcjaz.ca All rights reserved