D-MAX Motor Mount Set for Precise Adjustment - SD-304D by Yokomo  [SD-304D]

Yokomo SD-304D D-MAX Motor mount set
Price:
CAD$12.15
Brand:
Yokomo
Model:
SD-304D
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - DMAX category
Write a review

D-MAX adjustable motor mount assembly

This motor mount set is engineered for the D-MAX standard RC chassis and delivers a compact assembly to secure and finely adjust motor position. The kit centers on a motor mount and clamp paired with an aluminum motor cam to permit small, repeatable changes to motor placement without modifying the chassis.

In practice the SD-304D assembly acts as a tuning item: it holds the motor rigidly under load while the cam and spring arrangement allow incremental fore-aft adjustments. That makes it useful for drivers who need to dial motor position for pinion engagement and drivetrain balance during track setup.

The package contains the mount, clamp, cam, spring and the screws required to fit to a D-MAX standard chassis; installation involves aligning the cam, tightening the clamp, and securing the assembly with the supplied button head and countersunk screws.

Packing includes

  • Motor Mount - 1 pcs
  • Motor Clamp - 1 pcs
  • Aluminum Motor Cam - 1 pcs
  • Spring - 1 pcs
  • 3 x 6mm button head screw - 2 pcs
  • 3 x 12mm button head screw - 1 pcs
  • 3 x 18mm button head screw - 1 pcs
  • 3 x 8mm countersunk screw - 3 pcs
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How do I install the SD-304D on a D-MAX standard chassis?

Begin by positioning the mount over the chassis mounting points, align the cam to the motor boss, then hand-tighten the clamp screws. Finally secure all supplied button head and countersunk screws to the chassis to lock the assembly in place.

What hardware arrives in the box for fitting?

The kit ships with the motor mount, the clamp, the aluminum motor cam, a spring and the set of button head and countersunk screws listed above so you can mount directly to a D-MAX standard chassis.

Any tips for setting the cam for correct pinion mesh?

Set the cam to a neutral position, fit the motor and pinion, then make minute fore-aft adjustments while checking mesh under light load. Once the desired engagement is achieved, tighten the clamp and recheck after a short test run.

Copyright © 2008-2026 rcjaz.ca All rights reserved