CR-01 Chariot Skid for TAMIYA CR01-25/SI by 3Racing  [CR01-25/SI]

Scale skid designed for CR-01 use

This Chariot skid is a scale hop-up designed to work with the TAMIYA CR-01 chassis. The CR01-25/SI unit provides a sacrificial contact surface under the chassis to limit wear during low-speed trail and scale crawling.

Fit and compatibility: this skid is laid out for the CR-01 mounting pattern and aligns with common CR-01 installation points. Verify your chassis skid mounts and post positions on the CR-01 before completing installation.

Installation notes: basic hand tools are needed to fit the skid. Confirm hole alignment, select correct fastener lengths and apply thread-lock on metal threads where required. Tighten hardware evenly and recheck suspension and steering clearances after fitting.

Tuning and use: fitted as a hop-up, the skid protects underside contact areas and helps manage abrasion during trail sessions. Consider the effect on ground clearance and approach or departure angles on your CR-01 when choosing this protection piece.