B-MAX2 / MR Mid Wing Mount and Rear Bumper - Yokomo YOKB2-001WB  [YOKB2-001WB]

Mid-position rear wing mount and bumper unit

The Yokomo YOKB2-001WB is an RC-scale mid-position wing mount and rear bumper made for the B-MAX2 / MR chassis. It provides the mounting point for the rear wing and an integrated bumper face that helps absorb minor knocks and keep the body aligned on track.

Fitment is specific to the B-MAX2 / MR series, so check your chassis code before buying. The mid mounting shifts wing height and lever arm from the chassis centerline, which changes rear downforce and overall balance in turns.

Installation is simple for anyone used to touring car layouts: remove the stock rear wing mount and bumper, position the YOKB2-001WB on the chassis bosses, and fasten with the existing hardware. Standard hex drivers are all that are normally required; verify thread engagement and clearance before the first run.

Tuning note: installing the wing at the mid location usually moves aerodynamic load toward a compromise between high downforce and lower drag. Use this change when fine tuning rear grip and rotation, and adjust wing angle stepwise to find the preferred handling.