B-MAX2 Front Hex Hub Wheel for 1/10 Off-Road - YOKB2-821HW by Yokomo  [YOKB2-821HW]

Yokomo B2-821HW - Front Hex hub front wheel (White) for B-MAX2
Price:
CAD$8.01
Brand:
Yokomo
Model:
YOKB2-821HW
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

Install Guide: B-MAX2 Front Hex Hub

This 1/10-scale front hex hub wheel is made for the B-MAX2 platform and comes in a white finish. It functions as a direct-fit front wheel hub for chassis that use the B-MAX2 front hex interface, intended for standard off-road setup and wheel fitment on radio-controlled buggies.

When replacing the B-MAX2 front hex hub, align the hex interface with the original hub position and secure using the same wheel mounting hardware specified by the chassis. Confirm correct hex seating, wheel clearance, and steering travel before running to prevent interference with suspension movement or steering linkages.

For setup work this front hex hub wheel is useful when comparing tyre choices, offsets and front-end handling changes; the white finish helps with quick visual checks during setup. Remember this is an RC-scale accessory intended only for model use.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

What is the correct replacement procedure for the B-MAX2 front hex hub?

Remove the wheel nuts, pull the existing hub free from the axle, align the new hub so the hex seats fully, then reinstall the wheel hardware to the chassis recommended tightness. Use the proper driver and follow the chassis manual for torque guidance.

Which basic tools are needed for installation?

Typical tools are the correct hex driver for your wheel nuts, a small set of pliers or nut drivers to remove hardware, and any chassis-specific spanners needed to access the front hub area.

Do I need different wheels when fitting this hub?

If the hex size and wheel offset match your existing setup, original wheels should fit. Verify wheel hex dimensions and clearance before use, and check the seller listing to see if tyres or inserts are included.

Copyright © 2008-2026 rcjaz.ca All rights reserved