BD9 Upper Bulkhead (A) Replacement for BD9 - B9-32UA19A by Yokomo  [B9-32UA19A]

Yokomo B9-32UA19A Upper Bulkhead (A)(F Left/R Right) for BD9
Price:
CAD$38.26
Brand:
Yokomo
Model:
B9-32UA19A
GTIN:
0639342204496
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - MRTC-BD10FF category
Write a review

Fitting notes for Upper Bulkhead (A) on BD9

This is the Yokomo B9-32UA19A upper bulkhead (A) made for BD9-family RC touring chassis. The part is supplied as 1 pcs and is intended for installation on the front-left position or the rear-right position depending on chassis layout and setup.

Fit this bulkhead when replacing a worn or broken upper mount or when altering suspension geometry during setup. It serves as the mounting point for suspension links and locates the upper arm relative to the chassis, so confirm left/right placement before fitting.

Specifications

  • Item: Upper Bulkhead (A) front-left / rear-right
  • Material: Not specified
  • Model Number: B9-32UA19A
  • Compatibility: MRTC-BD919, MRTC-BD919S, MRTC-BD10, MRTC-BD10A, MRTC-BD10FF, MRTC-BD10LC, MRTC-BD10LCA, MRTC-BD10LCR, MRTC-BD10LCRA

Compatible Models

  • MRTC-BD919
  • MRTC-BD919S
  • MRTC-BD10
  • MRTC-BD10A
  • MRTC-BD10FF
  • MRTC-BD10LC
  • MRTC-BD10LCA
  • MRTC-BD10LCR
  • MRTC-BD10LCRA

Before finalising installation, verify the chassis code and left/right location, tighten fasteners to spec, check link geometry through suspension travel, and validate on a static rig prior to track use.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Is this supplied as a single unit and how many come in the pack?

The package contains 1 pcs of the Upper Bulkhead (A) intended for a single mounting location on the chassis.

Which mounting locations accept this bulkhead on BD9 setups?

This bulkhead fits the front-left or the rear-right position depending on the specific BD9-family chassis layout; check your chassis code before installing.

Can I swap this with other upper bulkhead styles on BD10 variants?

Refer to the compatibility list when considering swaps; some BD10 variants use different upper mount geometries so confirm part numbers and trial-fit where possible.

What checks should I make after fitting the bulkhead?

After fitting, recheck suspension link lengths, toe and camber settings, ensure there is no binding, and verify fastener torque before road testing.

Copyright © 2008-2026 rcjaz.ca All rights reserved