BD7/BD5 Rear Hub Carrier 0 degree - Yokomo BD-415A00 [BD-415A00]

Yokomo BD-415A00 Aluminum Rear hub carrier 0degreefor bd7/BD5

Price:

CAD$19.34

Brand:

Yokomo

Model:

BD-415A00

GTIN:

3888

Not Available

Please kindly input your name and email address, we will inform you once we have the restocking.

Or you may find similar product under the
Spares / Hop-ups - Yokomo - BD5 category

Write a review

Description
FAQ

Aluminum 0 degree rear hub carrier for BD7/BD5

This BD-415A00 rear hub carrier is an aluminum replacement part for scale RC touring chassis, designed to match the stock 0 degree toe-in geometry while increasing rear-end rigidity compared with the original component. The carrier keeps the standard toe setting but adds lateral stiffness at the hub to reduce compliance under load.

Installation notes: this carrier replaces the stock rear hub carrier and uses the same mounting points and hardware locations as the original 0 degree unit. Check fitment on your suspension arm mounts and confirm wheel hex alignment before final tightening. Use thread locker where appropriate and torque fasteners to your chassis manufacturer’s recommendations.

Tuning role: keeping the 0 degree toe preserves baseline rear traction while the stiffer hub behaviour can stabilise high-speed cornering and make handling more predictable. Try this carrier alongside different arm mounts and carrier angles to dial toe and roll-center interactions for specific track conditions.

Packing includes

Aluminum rear hub carrier - 2 pcs

Compatibility

DP-DIB2
DP-DIB2R
DP-DIB2A
DP-DIB2RA
DP-DIB
DP-DIBR
DP-DIBG
DP-DIBRS
DP-DIBL
DP-DIBLR
DP-DIBLG
DP-DIBRSB
MRTC-BD7RS
MRTC-BD715B
MRTC-BD715O
MRTC-BD715S
MRTC-BD716
MRTC-BD716H
MRTC-BD716O
MRTC-BD716S
MRTC-BD7RS2

Remark :

Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

How will this 0 degree carrier alter high-speed cornering behaviour?

The BD-415A00 keeps the factory 0 degree toe but raises hub lateral stiffness, which tends to reduce rear compliance under load and makes mid to high speed turn-in feel more consistent.

Is the BD-415A00 a direct bolt-in for BD7/BD5 cars?

Yes. It uses the same mounting points and mounting geometry as the original 0 degree hub carrier for the listed chassis, so it installs without chassis modification.

Any setup tips when combining with other carrier angles or arm mounts?

Progressively test different carrier angles and arm mount positions. Because this unit preserves toe, changes in handling will come from altered roll centre and lateral stiffness, so adjust other suspension elements incrementally to find the best balance.