BD7/BD5 Front Suspension Mount (Rear Side) - Yokomo BD-301FR  [BD-301FR]

Yokomo BD-301FR Blue Aluminum Front Suspension Mount (Rear side) for BD7/BD5
Price:
CAD$9.12
Brand:
Yokomo
Model:
BD-301FR
GTIN:
3888
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
Spares / Hop-ups - Yokomo - BD7 category
Write a review

Rear-side front suspension mount overview

The Yokomo BD-301FR is an RC-scale front suspension arm mount made for the rear side of the front suspension assembly and intended for use on Yokomo BD7 and BD5 touring-car chassis. The piece is machined from blue anodized aluminum to provide a solid mounting point for the suspension arm pins while remaining a dedicated RC component.

The mount locates the outer end of the front suspension arm and forms part of the front suspension geometry. The left-to-right pitch between the suspension arm pins is 43.5mm, a key dimension to confirm during installation so the arm pins line up correctly with hub carriers and the steering linkages.

Installation notes: confirm the 43.5mm pin pitch matches your chassis layout before fitting, re-use existing hardware where recommended by your chassis manual, and check for smooth articulation after tightening. In tuning, this mount affects roll center and track width relationships and is used to alter front-end response and steering feel on track or during club runs.

Compatibility

  • BD7
  • BD5
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Will this mount fit BD7 and BD5 chassis?

Yes. The part fits Yokomo BD7 and BD5 chassis as specified; always verify the 43.5mm pin pitch against your chassis before final installation.

What is the exact arm pin pitch?

The left-to-right suspension arm pin pitch for this mount is 43.5mm. Measure carefully to ensure correct alignment.

How will swapping this mount change handling?

Changing the arm mount alters front suspension geometry, shifting roll center and track width relationships which in turn affects steering feel and front-end balance.

Copyright © 2008-2026 rcjaz.ca All rights reserved