BD7 SLF Short Shock Conversion Kit - Yokomo YOKB7-2014SS  [YOKB7-2014SS]

BD7 SLF Short-Shock Conversion Overview

This conversion kit provides a short-shock solution to modify shock mounting geometry on BD7 SLF setups. It offers a compact damper stack option that changes effective shock length and the suspension response without requiring full shock replacement.

Purpose and scope:

• Enables conversion to shorter shock assemblies to suit specific SLF layout preferences.
• Used as a tuning component to adjust ride height, shock angle, and transient response during track setup sessions.
• Functions as an aftermarket accessory for hobbyists tuning their damping package and geometry; this is an RC-scale part only.

Installation and tuning notes:

• Fitting typically replaces existing shock top or bottom mounts or uses the kit adapters to shorten the effective shock length; follow any manufacturer fitting points if supplied.
• Shorter shocks reduce available travel and alter leverage ratios, so re-evaluate spring rates, oil viscosity, and shock piston selection after installation.
• Verify clearance for suspension movement and steering through full compression and rebound cycles when testing the new geometry.

As a targeted tuning part, this short shock conversion kit is useful when adjusting BD7 SLF shock geometry is part of a planned setup change; always evaluate suspension travel and damping after fitting to confirm the handling balance you want.