BD10 Graphite Rear Stiffener Plate for Pitch Control - B10-302CPA Yokomo  [B10-302CPA]

Yokomo B10-302CPA Graphite stiffner plate for BD10
Price:
CAD$9.84
Brand:
Yokomo
Model:
B10-302CPA
GTIN:
0639342202560
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review

BD10 rear pitching stiffener overview

This Yokomo B10-302CPA graphite stiffener is an RC-scale rear plate that links the motor mount area to the rear stiffener assembly to raise resistance to pitching motions. The component is intended to deliver a controlled increase in rear longitudinal stiffness without altering the suspension geometry.

Adjustment is achieved by selecting different fastening holes for the screws, which provides incremental tuning of how the rear responds under acceleration and braking. The plate is graphite to keep weight low while adding torsional control to the rear end.

Compatibility is limited to the BD10 family and exact supported chassis are listed to ensure fitment integrity: MRTC-BD10, MRTC-BD10A, MRTC-BD10LC, MRTC-BD10LCA, MRTC-BD10LCR, MRTC-BD10LCRA.
Remark :
Due to limited stock availability, please notice that some Yokomo items may have to order from the factory and the ready time is around 4-6 weeks. Customer purchases the item is assumed to accept the waiting time which allows us to order directly from the manufacturer if the item is out of our warehouse.

Which specific BD10 models are supported by this plate?

The B10-302CPA fits the BD10 family models listed exactly: MRTC-BD10, MRTC-BD10A, MRTC-BD10LC, MRTC-BD10LCA, MRTC-BD10LCR, MRTC-BD10LCRA. Confirm chassis code before installation.

What handling changes should I expect after fitting this plate?

Expect increased rear pitching rigidity that can reduce squat on acceleration and alter rotation timing; tune the effect by using alternate screw positions to fine tune response.

What is the material and does installation require modifications?

The plate is made of graphite and is designed to bolt directly to the supported BD10 variants. No cutting is required, but verify hole alignment before final tightening.

Copyright © 2008-2026 rcjaz.ca All rights reserved