AXIAL YETI XL Centre Transmission Case Upgrade YTL038 by GPM  [YTL038]

AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038
Price:
CAD$92.40
Brand:
GPM
Model:
YTL038
Please kindly input your name and email address, we will inform you once we have the restocking.
Or you may find similar product under the
category
Write a review
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"
alt="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038" title="AXIAL Racing YETI XL Aluminium Center Transmission Case - 1set - GPM YTL038"

Aftermarket aluminium centre transmission case for YETI XL

This aluminium centre transmission case is an aftermarket replacement made to fit the AXIAL Racing YETI XL layout. It forms the main housing for the centre gearbox assembly in scale electric off-road rigs, giving a firmer mounting surface for gears and bearings while matching the stock geometry for direct fit in most common setups.

Fitment usually requires removing the factory plastic case, moving over the internal gears and bearings, and securing the new housing with the supplied stainless fasteners. When reassembling check gear mesh, align shafts and bearings carefully, and tighten screws in stages to avoid misalignment. This part is aimed at routine tuning and maintenance where added rigidity and the thermal traits of metal are beneficial.

Packing includes

  • Stainless Steel Counter Sink Flat Head Screw 3X25 - 4pcs
  • Stainless Steel Counter Sink Flat Head Screw 3X18 - 7pcs
  • Stainless Steel Counter Sink Flat Head Screw 3X16 - 3pcs
  • Stainless Steel Counter Sink Flat Head Screw 3X14 - 3pcs
  • Stainless Steel Button Head Screw 2.5X8 - 3pcs

Specifications

  • Item: Aluminium center transmission case
  • Material: Aluminum
  • Model Number: YTL038
  • Compatibility: AXIAL Racing YETI XL

Use this case as a direct service replacement or as part of a chassis refinement plan to increase gearbox support and component life; always confirm fit and fastener torque during installation.

Can I swap this in without other mods?

In most builds this is a bolt-in replacement using the stock mounting points and internals, but you should verify shaft alignment and gear mesh after fitting.

Which screws are included?

The package contains a mix of stainless counter sink and button head screws in the sizes listed in the packing section to secure the case and internal parts.

Do I need specialty tools to fit this case?

Basic RC tools and a torque driver for careful tightening are sufficient; a set of metric hex drivers and a small alignment jig or shims can help with precise mesh setup.

How do I maintain an aluminium case?

Keep mating faces clear of grit, avoid over-torquing screws, and inspect the case and fasteners during routine service. Clean aluminium with mild degreaser and a soft brush if needed.

Copyright © 2008-2026 rcjaz.ca All rights reserved