Axial Yeti Delrin +10mm Hex Wideners DYT010/+10MM by GPM  [DYT010/+10MM]

Delrin +10mm wheel hex spacers for Yeti

This RC wheel hex spacer set is made for the Axial Racing Yeti platform and supplied as a 2 pcs set in Delrin with a +10mm thickness to move the wheel offset outward. These parts are intended to adjust track width and clearances on the model and are not for full scale vehicles.

The wideners shift the wheel mounting face out by 10mm per side, changing clearance to suspension and bodywork and altering handling balance at chassis level. Fit them when you want a controlled track width increase to fine tune corner entry, prevent tyre rubbing with beadlocks, or accommodate wider tyres.

Fitting is simple on the Yeti hex hub system: remove the wheel and existing hex, slide the Delrin widener onto the hub, then refit the wheel and retainers with the original fasteners. Check thread engagement and wheel centring, then inspect for any contact with suspension arms or bodywork before running.