Axial Yeti C-hub Carrier Aluminum Upgrade - YT-25001-GU by Jazrider  [YT-25001-GU]

This gunmetal aluminum C hub carrier is an RC-scale replacement part made for the Axial Yeti platform as model YT-25001-GU. It installs in place of the stock C-hub carrier using the same mounting holes, yielding a stiffer connection between the steering knuckle and suspension upright.

In use, the carrier supports the steering knuckle pivot and keeps wheel alignment under load. Replacing the plastic unit with aluminum reduces flex at that joint, helping the chassis maintain steering geometry when you hit rough terrain or push high cornering loads.

Installation is straightforward: remove the wheel and knuckle assembly, unbolt the original C-hub carrier, and fit the aluminum part with the original fasteners. After fitting, cycle the steering to verify clearance and smooth operation.

Tuning note: the increased stiffness gives a crisper steering response. After swapping, recheck toe and steering centring as you tune to ensure predictable handling.