AXIAL SCX6 JLU Wrangler 17T Motor Pinion SCX6017TS by GPM  [SCX6017TS]

17T motor pinion compatible with AXIAL SCX6 platforms

This SCX6017TS motor pinion is a scale replacement designed for pinion-to-motor use on electric crawlers and rock bouncers. It is formed from high carbon steel to resist wear compared with common stock brass or softer alloys, and is intended to transfer motor torque into the drivetrain without implying any real vehicle use.

The pinion has 17 teeth with a 1mm pitch and a center bore sized for 5mm motor shafts as supplied in the original data. Fit this part when a 17T, 1mm-pitch pinion is required to maintain correct mesh with your spur gear and to match a 5mm motor shaft. The kit includes the small screw shaft accessory for securing the pinion to the motor where applicable.

Installation guidance: verify the motor shaft diameter is 5mm before fitting, set gear mesh carefully to avoid excessive backlash or binding, and tighten the set screw to the motor manufacturer's recommended torque. Inspect gear teeth periodically for wear to keep drivetrain performance consistent.