AXIAL SCX6 145mm Aluminum Front/Rear Dampers SCX6145F/R by GPM  [SCX6145F/R]

145mm CNC Aluminum Shock Set for Scale Crawlers

This RC-scale front and rear damper kit is made for AXIAL SCX6 platforms and is supplied as two shocks to replace the factory units. The bodies are machined from 6061 T6 aluminum and use a sealed shock-absorb cap to limit oil loss and keep damping consistent during trail work and slow crawler runs.

Design updates concentrate on long-term service and clearer tuning response: the coil spring wire diameter is increased from 2.1mm to 2.2mm for a firmer spring rate, the damper shaft is enlarged from 5.0mm to 7.0mm and polished to minimise flex, and the top spring retainer gives a mechanical preload adjustment to change perceived spring hardness.

The parts are intended for front or rear mounting on compatible SCX6 axles; installation replaces OEM dampers while retaining the vehicle's original top-retainer adjustment method. In use these components reduce internal friction and soak up impact loads to help maintain balance over uneven terrain.

Choose these 145mm aluminum dampers when you want stiffer springs, a thicker polished shaft to cut flex, and adjustable preload for better balance while crawling on technical trails.